Shop Town Line for a selection of industrial coatings for use in the most challanging environments.
100% Solids Epoxy Pre-Primer is formulated for use on both steel and masonry. For rusted steel where extensive surface preparation is needed, but not logistically possible, the penetrating properties and extended dry time — 16 hours at 77 °F — of this two-component epoxy seal crevices and other imperfections, promoting better adhesion for subsequent coats. For prepared masonry surfaces, V155 penetrates and seals, providing an excellent foundation for subsequent coats of Corotech epoxy floor coatings. The unique, 100% solids formula of V155 forms a sealed epoxy barrier that inhibits future corrosion.
Colorant Used: N/A
Color System Supported: N/A
V200 product is a heavy-duty alkyd enamel intended for use on a wide variety of surfaces, both interior and exterior. The surface-tolerant formula sticks to surfaces that may be marginally prepared, and the exceptional flow and leveling provides a smooth, uniform finish. Made with our toughest alkyd resin, this paint stands up to mechanical and human abuse, while the urethane fortification adds gloss and color retention in exterior spaces exposed to sunlight and rain.
Colorant Used: Universal
V201 product is a heavy-duty alkyd enamel intended for use on a wide variety of surfaces, both interior and exterior. The surface-tolerant formula sticks to surfaces that may be marginally prepared, and the exceptional flow and leveling provides a smooth, uniform finish. Made with our toughest alkyd resin, this paint stands up to mechanical and human abuse, while the urethane fortification adds gloss and color retention in exterior spaces exposed to sunlight and rain.
Colorant Used: Universal
This specially formulated anti-slip aggregate is designed to elevate the foot or wheel on a damp or wet surface, permitting the water to escape instead of causing the foot or wheel to hydroplane.
For helpful information, check out our tools and resources pageColorant Used: N/A
Color System Supported: N/A
Fast Dry Polyamide Epoxy is a unique satin sheen epoxy that cures fully in 24 hours at 77°F. In addition, this product cures in temperatures as low as 35°F in approximately 5 days. Fast Dry Polyamide Epoxy may be used as a high durability floor finish that can be put into service 24 hours after coating application when applied at 77 °F.
Colorant Used : Industrial
V225 is designed as a finish coat for metal where a rugged, abrasion-resistant, high-gloss finish is desired. This product may be used in field painting applications as well as shop applications. Designed for interior or exterior use, the chain stop formulation far surpasses many high-solids enamels on the market in gloss and color retention in exterior exposures.
Colorant Used: Industrial
Moisture Tolerant Quick-Set Epoxy Sealer is a two-component, fast-dry, waterborne polyamide hybrid sealer for masonry floors. It is an excellent primer/basecoat for high-performance epoxy floor systems, with fast-dry performance. This product can also be used as a stand-alone clear finish on masonry floors (2 coats).
Colorant Used: N/A
Color System Supported: N/A
Polyamide Epoxy Coating is a multi-use epoxy designed for tanks, machinery, floors, structural members, walls, boats, and other industrial and commercial substrates requiring a durable coating in severe environments. Floors: moderate- to heavy-duty performance in commercial/industrial environments exposed to heavy foot traffic and occasional traffic of lightweight rubber-tired vehicles, intermittent spillage of mild to heavier chemicals, occasional steam and chemical cleaning. Metal: excellent for use on ferrous metals, non-ferrous metals and galvanized metal.
Colorant Used: Industrial
Polyamide Epoxy Primer is formulated for use on ferrous and non-ferrous metals in industrial and commercial applications. This two-component, rust-inhibitive epoxy primer is an excellent choice for use as a rust-inhibitive base coat when used as part of a high-performance coating system. With proper top coating, it demonstrates excellent resistance to moisture and chemicals, including solvents, acids, and alkalis. Polyamide Epoxy Primer is also suitable for use on concrete substrates in secondary containment and immersion service applications.
Colorant Used: N/A
Color System Supported: N/A
Polyester Urethane is a multi-use, two-component product that provides excellent gloss and color retention, as well as superior abrasion, chemical, and solvent resistance. It may be used anywhere a performance urethane is necessary for interior or exterior applications. Excellent flow and leveling. It is ideal as a floor finish for commercial and industrial applications as well as airplane hangars.
Colorant Used: Industrial
This unique product provides epoxy toughness in a ready-to-use waterborne formula for walls, ceilings and trim (not ideal for floors). Low VOC and water cleanup make this product ideal for use in occupied areas. The cured film is scrubbable, resists water and common cleaning chemicals, and stands up to abrasion and marring. Excellent adhesion to many surfaces, including existing paint, drywall, primed masonry and primed metal.
Colorant Used: Universal
This unique product provides epoxy toughness in a ready-to-use waterborne formula for walls, ceilings and trim (not ideal for floors). Low VOC and water cleanup make this product ideal for use in occupied areas. The cured film is scrubbable, resists water and common cleaning chemicals, and stands up to abrasion and marring. Excellent adhesion to many surfaces, including existing paint, drywall, primed masonry and primed metal.
Colorant Used: Universal
Prep All Universal Metal Primer is an economical, single-component primer engineered to provide corrosion protection on all ferrous metals. This quick-drying formula provides fast production times, and its alkyd resin formulation allows for application of a wide variety of intermediate and finish coat products. Formulated for air spraying, it can also be applied by airless and HVLP sprayers, brushes, or rollers.
Colorant Used: N/A
Color System Supported: N/A
Quick-Dry Acrylic Spray DTM is an extremely durable, UV-resistant, modified-acrylic enamel that provides superior adhesion and maximum durability. Formulated for interior or exterior use on a variety of surfaces, including ferrous and non-ferrous metal, concrete, masonry, wood, and drywall. Quick-Dry Acrylic Spray DTM can also be used in dry-fall applications. Spray only application.
Colorant Used: Universal
Rapid Dry Alkyd Enamel is a high-performance, quick-dry, rust-preventive shop enamel formulated for use on ferrous metal substrates. Rapid Dry Alkyd Enamel is excellent for use in shop application facilities in the fabrication market, and also is ideal for use in the industrial refurbishment market as an implement, dumpster, machinery, or construction enamel.
Colorant Used: Industrial
Shop Primer is an economical steel primer for commercial use in mild to moderate exposures. This product is ideal as a temporary transport coat on fabricated pieces or as an economical barrier primer. It is a temporary coating. This primer may be top-coated with a wide variety of finishes. However, finishes containing strong solvents (Ketones, Xylene, Toluene) may cause wrinkling or lifting of Shop Primer.
Colorant Used: N/A
Color System Supported: N/A
Shop Primer is an economical steel primer for commercial use in mild to moderate exposures. This product is ideal as a temporary transport coat on fabricated pieces or as an economical barrier primer. It is a temporary coating. This primer may be top-coated with a wide variety of finishes. However, finishes containing strong solvents (Ketones, Xylene, Toluene) may cause wrinkling or lifting of Shop Primer.
Colorant Used: N/A
Color System Supported: N/A
Silicone Alkyd High Heat is designed to protect steel that is exposed to heat ranges up to 800 °F (425 °C). This product exhibits excellent weathering, resists mild industrial chemicals and moisture and is specific to industrial use.
Colorant Used: N/A
Color System Supported: N/A
Universal Metal Primer is a high-performance, one-component, quick-dry, rust-inhibitive metal primer, formulated for use on ferrous metal substrates. The phenolic alkyd resin formulation allows for a wide variety of intermediate and finish coats. The quick dry and recoat times allow for fast turn-around of production work. The barrier protection that this product provides, as well as the rust inhibitive pigmentation, leaves a film that prevents corrosion for many years. Additionally, this product may be used as a tie coat over existing coatings that will be finished with a high performance coating. It provides corrosion resistance for both interior and exterior steel surfaces.
Colorant Used: N/A
Color System Supported: N/A